Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Sunday, 20 March 2011

Something for the weekend

A visual metaphor for my weekend.

Having packed everyone else off, I spent the time on some serious DIY, popping out only to buy a pair of vintage ballroom dancing shoes. As you do.

I think they go rather well with my paint-encrusted boilersuit, mais non?

Saturday, 8 January 2011

Why make one when you could make two?

When I was kid my mother used to make most of my clothes. As she always bought too much fabric (just to be on the safe side, eh?) she never made just one thing, and I think I've absorbed that habit.

The yellow cushion was made with leftovers and still I managed to eke it out to make a little bag. I bough this 1970s print skirt at the fleamarket and with the fabric I cut off when I shortened it, I was able to make a belt and use a buckle I've been saving for years.

Sunday, 10 October 2010

Upholstery for beginners

These are pictures of my first upholstery project - and yet another good use for old curtain fabric. (Maybe I ought to be working for some kind of curtain marketing board, if such a thing exists...?)

This 1960s dressing table stool had been covered in off-white vinyl when we found it in a market. It cost the princely sum of £5.

Firstly, I prised off the dome-headed tacks holding the vinyl in place on the underside of the stool using the claw (forked) end of a hammer, with an few extra tugs with the pliers for some rusted ones. The foam padding covering the wooden seat was in very good condition, so I didn't need to replace it.

The fabric I wanted to use was the offcut from the bottom of a pair of 1970s curtains my friend Ali had me shorten for her. Because it was a lighter weight than upholstery fabric, I covered the stool with a layer of canvas first, to strengthen it. The vinyl I had taken off served as a pattern to cut out the canvas and the outer fabric. I used a staple gun to attach both layers of fabric to the underside of the stool - because it is a bowed shape (I never choose anything too easy for a first go at anything!) I started from the middle of each side, pulling the fabric taught, rather than at the corners.

Having secured the sides, the corners of the canvas were folded over squarely and tucked in, like "hospital corners" on a bed sheet. To avoid extra bulk, the corners of the outer fabric were turned in the opposite direction to the ones on the canvas layer.

The stool turned out really well, which is always very encouraging for a first attempt. And it cost the equivalent of two lattes at my cafe of choice, plus an hour of my time. I'll probably do an entire couch next, knowing me.